Aervoe Construction Marking Paint - Case of 12

Aervoe Construction Marking Paint is an aerosol quality marking paint, packaged in a can that may only be operated in an upside down position. Aervoe Construction Marking Paint is formulated to meet a variety of marking applications while still providing good initial color visibility, good color retention and adhesion. Aervoe Construction Marking Paint provides great color durability for up to 3 months, depending on traffic and exposure. 

Aervoe Construction Marking Paint is not affected by moisture or water and it will not wash away once dry. Aervoe Construction Marking Paint can be used with the cap on in Aervoe applicators #244/245. The spray through cap eliminates accidental discharge. Each can of Aervoe Construction Marking Paint is non-clogging and empties completely.

Aervoe Construction Marking Paint is designed to adhere to most surfaces, including pavement, gravel and soil. It can be used for marking at construction sites, locator and utility identification, landscaping, or other general marking requirements.

Aervoe Construction Marking Paint meets standards set by OSHA and APWA/ONE Call Systems.

Please Note: Aervoe Construction Marking Paint is not recommended for use on short cut grass such as golf course greens.

To apply Aervoe Construction Marking Paint:
Shake can well before use and for 1 to 2 minutes after agitator ball is heard. Remove tab from tamper-resistant cap. With proper alignment of the activator bar, Aervoe Construction Marking Paint can be used with the cap on in Aervoe applicators #244/245. Apply Aervoe Construction Marking Paint 3 to 4 inches from surface as a writing tool, and 5 to 8 inches in the applicator for a 3/4 inch line or continuous directional mark. Keep can in motion during use to prevent puddling. Agitate can periodically during application. Clear paint from valve and tip after each use by turning can in an upright position and spraying for 3 to 5 seconds. For best results, use a temperatures between 60 and 80 degrees farenheit.